The Basant 1000 Ton Two Point Power Press is a mechanical-drive machine built with two drive points across its width instead of one central crank, spreading load evenly over a wide bed. This configuration comes with a 100 HP motor, making it suited to wide-bed stamping, piercing, drawing and trimming where load needs to be spread evenly across a large die area. Manufactured at Basant Mechanical Works’ Ludhiana facility since 1957, ISO 9001:2015 certified.
Two Point Power Press drives the ram from two connection points across its width instead of one central crank, spreading load evenly over a wide bed -- suited to heavy-gauge, wide-bed cutting, piercing, drawing and trimming where a single-point press would flex or twist under load.
1000 Ton Two Point Power Press
1000 Ton Mechanical Two Point Power Press — full specification table and FAQs on this page.
Technical Specification for 1000 Ton Two Point Power Press
| Capacity in tons | 1000 |
|---|---|
| Ram Area in mm | 1400x1000mm |
| Distance table to RAM | 750mm |
| Power Required | 100 HP |
Our Two Point Power Press Machine is built with a heavy fabricated steel frame, dual-point drive for balanced loading across the full bed width, and a motorised ram adjustment for fast die changeover. This construction keeps the ram square to the bed even under off-centre loading, which is common in large-format stamping dies.
Ask For PriceFAQ
What is a Two Point Power Press used for?
It's used for wide-bed stamping, piercing, drawing and trimming where load needs to be spread evenly across a large die area.
Why use two drive points instead of one?
A single central drive point can let a wide ram tilt or flex under off-centre load; two points support the ram evenly across its width, holding accuracy on large dies.
What tonnage range does Basant's Two Point Power Press cover?
Roughly 200 to 1000 tons.
